BSU Series Crossed Cylindrical Roller Bearings

BSU series cross cylindrical roller bearing model

Features of BSU series crossed cylindrical roller bearings

1. Cross roller 90 degree raceway;

2. The size of BSU series crossed cylindrical roller bearings is from 130 to 360 mm;

3. Material: hardened bearing steel super precision raceway;

4. For the rotation of the outer ring, the inner and outer rings are integrated with preload and negative clearance (VSP) to unify the starting torque;

5. BSU series crossed cylindrical roller bearings have high rigidity;

6. The inner and outer rings have mounting holes;

7. Use DIN 51825 KP2N grease, outer ring oil groove.

Installation method of BSU series cross cylindrical roller bearing

1. Preparation of components before installation

Carefully check the quality of each part, carefully remove the burrs on the surface, and remove the rough parts on the castings to avoid installation problems.

2. Installation steps

To avoid damage to the bearing, you cannot directly tap it with a tool, and apply pressure evenly on the edge to make it tight little by little.

3. After the installation is complete

According to the operating conditions, gradually increase the speed and load, and detect the noise, vibration and temperature rise. If there is any abnormal phenomenon, stop the operation immediately and conduct detection.